Film, metal and silicone tipping options for shoelaces and cord ends. Choose a model to view its photographs, technical data and English catalogue.
21 / 21 Models
01Automatic film tipping and cutting for shoelaces, with a 32-250 cm cutting length range. PLC control is available as an option.
02Automatic shoelace film tipping and cutting, with a 35-150 cm cutting length range. PLC control is available as an option.
03Compact cord tipping equipment, shown with a film reel and a separate electrical cabinet. Discuss the cord sample and required tip dimensions with Yishuo.
04Semi-automatic cord tipping equipment in a vertical frame, shown with belt drive, a film reel and a work lamp.
05Foot-operated cord tipping equipment, shown with an upper control panel, side-mounted film reel and enclosed lower cabinet.
06Reference output · 3,500-4,200 pcs/h / Mould thickness · 6 mm
07Cutting length options · 35-100 / 35-150 / 35-200 cm / Tooling diameters · 1.9 / 2.1 / 2.3 / 2.5 / 2.8 / 3.0 / 3.2 / 3.5 / 3.7 / 4.0 / 4.2 / 4.5 / 4.8 mm
08Cutting length · 9 cm and above / Reference output · 1,000 pcs/h
09Power · 0.75 kW / Power supply · 3-phase 380 V, 50 Hz
10Power supply · Single-phase 220 V, 50 Hz / Net weight · 51 kg (machine and platen)
11Reference output · 5 pieces per cycle; 8,000 per 8-hour shift / Tip shapes · Square / round / triangle / oval
12Machine dimensions · 600 x 1,100 x 1,300 mm / Power supply · Single-phase 220 V, 50 Hz
13Machine dimensions · 700 x 1,300 x 1,480 mm / Power supply · Single-phase 220 V, 50 Hz
14Reference output · 5 pieces/cycle; 8,000 pieces/8 h / Tip shapes · Square, round, triangular, oval
15Cutting length · 0.4-1.5 m / Reference output · 40 pieces/min
16Cutting length · 0.4-2.5 m / Reference output · 25 pieces/min
17Motor · 3 HP / 380 V / Machine dimensions · 2,300 x 1,150 x 1,700 mm
18Motor · 1 HP / Power supply · 440 V
19Operation · Electric / Power supply · 220 V
20Operation · Hydraulic / Power supply · 220 V
21Power supply · 220 V / Machine dimensions · 600 x 350 x 900 mm
Answers about applications, selection, configuration and purchasing.
This range provides tipping and cutting for shoelaces, garment drawcords, bag cords and sportswear cords. Cord material, size and the required tip determine the configuration.
Provide cord diameter or width, cord thickness, desired tip length and a finished sample. Feeding, cutting and tipping arrangements must be confirmed against these requirements.
They are different process requirements. State whether you need a plastic or film tip, or a film-free finish, and send a sample so the correct machine process can be identified.
Flat-tape suitability must be checked for the selected model. Send the tape width, thickness and desired finished tip so feeding, gripping and tooling requirements can be reviewed before confirmation.
Provide your factory voltage, number of phases and frequency, including whether you use 50 Hz or 60 Hz. We will confirm the available electrical configuration for the selected model before the order is finalized.
Delivery time is confirmed for each order after the model, configuration, quantity and stock availability are checked. Refer to the agreed quotation or proforma invoice for the delivery schedule of your machines.
Our usual terms are 30% deposit and 70% balance before shipment by T/T. The payment terms stated in the final quotation and proforma invoice apply to your order.
Send the machine model, year, nameplate photo, clear photos of the part and its key dimensions. We will check compatibility and availability before quoting. Similar-looking parts should be checked by dimensions before ordering.
